GYEON Q2 Syncro EVO

Gyeon Q² Syncro EVO is a true evolution in the world of ceramic coatings. Thanks to its renewed formula, Gyeon Q² Syncro EVO is more durable, more water-repellent, gives more shine and most importantly - it can be applied outdoors! Gyeon Q² Syncro EVO consists of three components. Gyeon Q² Mohs EVO plays the role of the first layer - base. It provides a dense, firmly attached to the paint surface layer, which is incredibly hard and resistant to scratches and harmful influences. However, Gyeon Q² Skin EVO is intended to be applied on top of Gyeon Q² Mohs EVO, which gives crystal shine, depth of color and an unsurpassed degree of water repellency of 120 degrees. Gyeon Q²M Cure is the third phase of the system. Gyeon Q²M Cure plays the role of a final product (top coating), and with it you can regularly maintain and renew the qualities of the ceramic coating. The end result of Gyeon Q² Syncro EVO is a coating that has a hardness of 9H, thus preventing the appearance of circular scratches and other defects, is resistant to acidity pH 2-11 and makes the car look like glass - shiny and with great depth of color. Other advantages of the coating are more difficult to dirty and easier to wash. Q² Mohs EVO uses fluoro-modified polysilazanes for the first time in the automotive industry. Why is this so important? The modification of polysilazanes in the base coat brings huge benefits at all levels: durability, chemical resistance and ease of use. Hardness: 9H Water repellency angle: 120 degrees pH resistance: 2-11 Thickness: 0.2 – 0.5qm Durability: >50 months / 50,000km. Consumption rate: 15-25ml/car In the kit you will find: 30ml/50ml Q² MOHS EVO 30ml. Q² SKIN EVO 100ml. Q²M CURE 1pc. renewed applicator 1pc. Gyeon sticker 1bg. instructions How to use: All EVO coatings can be applied outdoors. However, never use in direct sunlight and check the weather forecast! The coating should not get wet during the first 12 hours after application. 1. Polish the car to perfection and degrease it. 2. Place the cloth on the applicator and drip Gyeon Q2 Mohs EVO Quartz Coating. 3. Spread with horizontal and vertical movements, working on a single detail. 4. Let dry for 20-30 seconds. 5. Wipe with a microfiber cloth. 6. After a minimum of 4 hours, proceed to the application of Gyeon Q² Skin EVO. 7. Spread with horizontal and vertical movements, working on a single detail and wipe immediately without waiting. 8. After a minimum of 12 hours after applying Gyeon Q² Skin EVO, you can switch to Gyeon Q²M CURE. 9. Spray and wipe. Do not wet the vehicle for the next 12 hours and do not use chemically active products for up to 72 hours. Work on a cool surface with an ambient temperature between 15 and 30 degrees. Be careful not to overdo the waiting time and remember that the drying time and respectively wiping of the product are directly dependent on the ambient temperature. Every 3-4 details, the tissue that is placed on the applicator is replaced with a new one.